PINE TECHNOLOGY PT-611 Data bus: 16-bit, ISA Size: Half-length, half-height card Hard drive supported: Two IDE (AT) Interface drives Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB drives [Image] CONNECTIONS Function Location 40-pin IDE(AT) Interface connector IDE 2-pin connector - Drive active LED CN2 34-pin control cable connector - floppy drive FDD USER CONFIGURABLE SETTINGS Function Location Setting » I/O Channel Ready signal JP1 pins 1 & 2 disabled closed I/O Channel Ready signal JP1 pins 2 & 3 enabled closed » Hard drive enabled JP2 pins 1 & 2 closed Hard drive disabled JP2 pins 2 & 3 closed » Floppy drive enabled JP3 pins 1 & 2 closed Floppy drive disabled JP3 pins 2 & 3 closed » Floppy drive booting sequence JP4 pins 1 & 2 is A:/B: closed Floppy drive booting sequence JP4 pins 2 & 3 is B:/A: closed » Floppy drive port address is JP5 pins 1 & 2 3F0-3F7h closed Floppy drive port address is JP5 pins 2 & 3 370-377h closed » Hard drive port address is JP6 pins 1 & 2 1F0-1F7h closed Hard drive port address is JP6 pins 2 & 3 170-177h closed